@// E:\dev\PathAwayPC4\Windows\Converters4\MapConverter\SrcWin\PWMapMan.rc file@ @ @
@1033@321@resStrConfirmAbortProcess@Are you sure you want to cancel this process?
@1033@320@resStrSendToWinMobile@Send to Windows Mobile Device
@1033@1609@PW4resErrCompressionFmtNotSupported@Compression Format Not Supported.\n%s 
@1033@319@resErrActiveSyncSendFailed@an error occurred sending "%s" to the device
@1033@318@resErrActiveSyncConnectionFailed@the connection to ActiveSync failed
@1033@317@resStrEditScale@Scale Factor
@1033@316@resStrEasting@Easting:
@1033@315@resStrNorthing@Northing:
@1033@314@resStrLongitude@Longitude:
@1033@313@resStrLatitude@Latitude:
@1033@312@resStrNorthingCenter@Latitude Center:
@1033@311@resStrEastingCenter@Easting Center:
@1033@310@resStrNorthingBR@Northing BR:
@1033@309@resStrEastingBR@Easting BR:
@1033@308@resStrNorthingTL@Northing TL:
@1033@307@resStrGridCenter@Grid Center:
@1033@306@resStrGridBR@Grid BR:
@1033@305@resStrGridTL@Grid TL:
@1033@304@resStrConfirmRemovePoints@This operation will remove all known points.\nProceed ?
@1033@303@resStrCalibration@Calibration
@1033@302@resStrOptions@Details
@1033@301@resStrRendering@Rendering...
@1033@300@resStrft@ft
@1033@299@resStrm@m
@1033@298@resStrkph@kph
@1033@297@resStrEastingTL@Easting TL:
@1033@296@resStrmph@mph
@1033@295@resStrkn@kn
@1033@294@resStrkm@km
@1033@293@resStrmi@mi
@1033@292@resStrnm@nm
@1033@291@resStrSWsw@SWsw
@1033@290@resStrDecimalPlace@.
@1033@289@resStrMapClickPrompt@Click on the on the map to insert the map XY coordinates
@1033@288@resStrErr_BadLong@Left(West) Longitude must be less than Right (East).
@1033@287@resStrErr_BadLat@Top(North) Latitude must be greater than Bottom(South).
@1033@286@resStrErr_BadCoord@Map coordinates must be the format N45 03.7363\nUse a space to separate degrees and minutes.
@1033@285@resStrErr_BadScale@Map scale must be greater than 0.\n
@1033@284@resStrMapCoordErr@Map Coordinates Error
@1033@283@resStrNS@NS
@1033@282@resStrEW@EW
@1033@281@resStrLatDist@North/South Miles:
@1033@280@resStrLongDist@East/West Miles:
@1033@279@resStrLatCenter@Latitude (N/S) Center:
@1033@278@resStrLongCenter@Longitude (E/W) Center:
@1033@277@resStrLatBR@Latitude (N/S) BR:
@1033@276@resStrLongBR@Longitude (E/W) BR:
@1033@275@resStrLatTL@Latitude (N/S) TL:
@1033@274@resStrLongTL@Longitude (E/W) TL:
@1033@273@resStrComboCalType@Type of Calibration. Non-projected (rectangular) maps give best performance in the application.
@1033@272@resStrComboMapDatum@Select the Map Datum. WGS84 is the default and provides best performance in the application.
@1033@271@resStrComboMapProj@Select the type of Map Projection.
@1033@270@resStrCoordPoints@Calibrate the map by known geographic points on the map.
@1033@269@resStrCoordTLBR@Define the map coords by the top-left and bottom-right corrdinates of the map.
@1033@268@resStrCoordScale@Define the map coords by the known center of the map and vertical/horizontal size in miles.
@1033@267@resStrCalPointsRemoveButton@Remove the current Calibration point
@1033@266@resStrCalPointsPrevButton@Display Previous Calibration point
@1033@265@resStrCalPointsNextButton@Display Next Calibration point
@1033@264@resStrEditUTMZone@UTM Zone number
@1033@263@resStrSouthHemCheckbox@Map is on the southern hemisphere
@1033@262@resStrEdity_0@False Northing
@1033@261@resStrEditx_0@False Easting
@1033@260@resStrEditlat_2@Latitude of first second parallel
@1033@259@resStrEditlat_1@Latitude of first standard parallel
@1033@258@resStrEditlat_0@Latitude of natural origin
@1033@257@resStrEditlon_0@Longitude of natural origin or central meridian
@1033@256@resStrCalPointsYField@Y (Vertical) pixel of a known point on the map. Enable "Mark" and  click on the map to set this value
@1033@255@resStrCalPointsXField@X (Horizontal) pixel of a known point on the map. Enable "Mark" and click on the map to set this value
@1033@254@resStrCalPointsLatField@Latitude (Vertical or North-South) coord of a known point on the map. Format Ndd mm.mmmm. (degrees minutes). Ie. N45 30.75
@1033@253@resStrCalPointsLonField@Longitude (Horizontal or East-West) coord of a known point on the map. Format Wdd mm.mmmm (degrees minutes). Ie. W85 35.75
@1033@252@resStrBRLatitude@Latitude (Vertical or North-South) coord at the bottom-right corner of the map. Format Ndd mm.mmmm. (degrees minutes). Ie. N45 30.75
@1033@251@resStrBRLongitude@Longitude (Horizontal or East-West) coord at the bottom-right corner of the map. Format Wdd mm.mmmm (degrees minutes). Ie. W85 35.75
@1033@250@resStrTLLatitude@Latitude (Vertical or North-South) coord at the top-left corner of the map. Format Ndd mm.mmmm. (degrees minutes). Ie. N45 30.75
@1033@249@resStrTLLongitude@Longitude (Horizontal or East-West) coord at the top-left corner of the map. Format Wdd mm.mmmm (degrees minutes). Ie. W85 35.75
@1033@248@resStrImageSingular@image
@1033@247@resStrCounterFormat@%d %s, %s %s used
@1033@246@resStrUnknownError@an unknown error occurred
@1033@245@resStrGenericAction@complete the operation
@1033@244@resStrDepthCtlPrefix@Color depth: 
@1033@243@resStrDimensionCtlPrefix@Dimension: 
@1033@242@resStrSizeCtlPrefix@Size: 
@1033@241@resStrDateCtlPrefix@Date: 
@1033@240@resStrWinFileTypeCal@Map Calibration Files (*.pwm, *.jpr,*.cal)
@1033@239@resStrAppName@PathAway Tools - Map Manager
@1033@238@resStrSaveChangesFormat@Save changes to %s?
@1033@237@resStrUntitled@Untitled
@1033@236@resStrSavePrcPrompt@Save PathAway Map As
@1033@235@resStrOpenPrcPrompt@Select a map database to open
@1033@234@resStrOpenImagePrompt@Select a map to add
@1033@233@resStrWinFileExtsAll@*.*
@1033@232@resStrWinFileTypePWAll@All Image and Calibration Files
@1033@231@resStrWinFileExtsPWAll@*.bmp;*.jpg;*.cal;*.pwm;*.jpr
@1033@230@resStrWinFileExtsCal@*.pwm;*.jpr;*.cal
@1033@229@resStrCompressed@Compressed (OS 3.3+)
@1033@228@resStrDepth1@1-bit (BW, all OS)
@1033@227@resStrDepth2@2-bit (4 grays, OS 3.1+)
@1033@226@resStrCountingImages@Counting images...
@1033@225@resStrProgressFormat@%d of %d images
@1033@224@resStrRevertAlbumAction@revert the album
@1033@223@resStrCreateAlbumAction@create the map database
@1033@222@resStrZero@zero
@1033@221@resStrKilobytes@KB
@1033@220@resStrBytes@bytes
@1033@219@resStrImagePlural@images
@1033@218@resStrWinFileTypeAll@All Files (*.*)
@1033@217@resStrWinFileExtsPrc@*.prc
@1033@216@resStrWinFileTypePrc@PathAway Map Files (*.prc)
@1033@215@resStrWinFileExtsImages@*.bmp;*.jpg
@1033@214@resStrWinFileTypeImages@Image Files (*.bmp, *.jpg)
@1033@213@resStrDimensionFormat@%dx%d pixels
@1033@212@resStrSizeFormat@%d bytes
@1033@211@resStrDepth4@4-bit (16 color, OS 3.3+)
@1033@210@resStrDepth8@8-bit (256 colors, OS 3.5+)
@1033@209@resStrDepth16@16-bit (65536 colors, OS 4.0+)
@1033@208@resStrDepthColumn@Color depth
@1033@207@resStrDimensionColumn@Dimension
@1033@206@resStrSizeColumn@Size
@1033@205@resStrDateColumn@Date
@1033@204@resStrNameColumn@Name
@1033@203@resStrErrorMsgSuffix@.\n
@1033@202@resStrErrorMsgInfix@ because 
@1033@201@resStrErrorMsgPrefix@Could not 
@1033@200@resStrChangeDepthAction@change the map image's color depth
@1033@199@resStrDeleteImageAction@delete the map image
@1033@198@resStrAddImageAction@add the map image
@1033@197@resStrHotSyncAction@send the map database to HotSync
@1033@196@resStrSaveAlbumAction@save the map database
@1033@195@resStrOpenAlbumAction@open the map database
@1033@194@resErrRemedyActiveSyncSendFailed@Ensure ActiveSync is running, the device is connected, and there is enough free storage memory on the device.
@1033@193@resErrRemedyActiveSyncConnectionFailed@Make sure ActiveSync is running, and the device is connected.
@1033@192@resErrRemedyActiveSyncConnectionTimeOut@Make sure ActiveSync is running, and the device is connected.
@1033@191@resErrRemedyImageTooSmall@You can only add images that are larger than 10 by 10 pixels.
@1033@190@resErrRemedyBadJPEGDecompression@ 
@1033@189@resErrRemedyBadAlloc@Try closing other programs to make more memory available.
@1033@188@resErrRemedyUnknown@ 
@1033@187@resErrRemedyImageTooBig@You can only add images that are 160 by 160 pixels or smaller.
@1033@186@resErrRemedyAlreadyReported@ 
@1033@185@resErrRemedyImageFileCorrupt@ 
@1033@184@resErrRemedyUnknownImageKind@Try using another graphics program to convert the image to BMP or JPEG format.
@1033@183@resErrRemedyNotOurFile@ 
@1033@182@resErrRemedyFileOpen@Make sure the file is not being used by some other program.
@1033@181@resErrRemedyFileCreate@Make sure you have enough disk space available.
@1033@180@resErrRemedyFileWrite@Make sure you have enough disk space available.
@1033@179@resErrRemedyFileRead@ 
@1033@178@resErrRemedyImageListFull@Try re-importing the map with a lower scale factor.
@1033@177@resErrRemedyNoErr@ 
@1033@176@resErrActiveSyncConnectionTimeOut@the connection to ActiveSync did not respond
@1033@175@resErrFormatImageTooSmall@the image was too small
@1033@174@resErrFormatBadJPEGDecompression@JPEG decompression failed. \n%s
@1033@173@resErrFormatBadAlloc@there is not enough free memory available
@1033@172@resErrFormatUnknown@an unknown error occurred
@1033@171@resErrFormatImageTooBig@the picture was too big
@1033@170@resErrFormatAlreadyReported@ of the error already reported
@1033@169@resErrFormatImageFileCorrupt@file "%s" is in an unknown picture format
@1033@168@resErrFormatUnknownImageKind@file "%s" is in an unknown picture format
@1033@167@resErrFormatNotOurFile@file "%s" is not a PathAway Map Database
@1033@166@resErrFormatFileOpen@file "%s" could not be opened
@1033@165@resErrFormatFileCreate@file "%s" could not be created
@1033@164@resErrFormatFileWrite@there was a problem while writing file "%s"
@1033@163@resErrFormatFileRead@there was a problem while reading file "%s"
@1033@162@resErrFormatImageListFull@the map database is full
@1033@161@resErrFormatNoErr@no error occurred
@1033@160@701@ERR_IA_INVALID_FILE_TYPE
@1033@159@555@ERR_PILOT_USER_ACCESS
@1033@158@554@ERR_PILOT_BAD_FILENAME
@1033@157@553@ERR_PILOT_NOT_FOUND
@1033@156@552@ERR_PILOT_NO_USER_FILE
@1033@155@551@ERR_PILOT_NO_DIRECTORY
@1033@154@550@ERR_USER_MANAGER_BASE
@1033@153@522@ERR_IA_INVALID_USER_ID
@1033@152@521@ERR_PALM_OTHER_USERSDAT_ACCESS_PROBLEM
@1033@151@520@ERR_PALM_SEMAPHORE_ACCESS
@1033@150@519@ERR_PALM_UNABLE_TO_CREATE_NEW_FILE
@1033@149@518@ERR_PALM_NO_CORE_PATH
@1033@148@517@ERR_PILOT_INVALID_CREATORID
@1033@147@516@ERR_PILOT_INVALID_BUFFER
@1033@146@515@ERR_PILOT_INVALID_FILE_TYPE
@1033@145@514@ERR_PILOT_INVALID_INDEX
@1033@144@513@ERR_PILOT_INVALID_SOURCE_FILE
@1033@143@512@ERR_PILOT_FILE_ALREADY_EXISTS
@1033@142@511@ERR_PILOT_INVALID_PATH
@1033@141@510@ERR_PILOT_INVALID_REGISTRY
@1033@140@509@ERR_PILOT_INVALID_PATH_TYPE
@1033@139@508@ERR_PILOT_USERSDAT_ALREADY_EXISTS
@1033@138@507@ERR_PILOT_INVALID_FILE_INDEX
@1033@137@506@ERR_PILOT_INVALID_FILENAME
@1033@136@505@ERR_PILOT_INVALID_USER
@1033@135@504@ERR_PILOT_COPY_FAILED
@1033@134@503@ERR_PILOT_NO_USERSDAT_FILE
@1033@133@502@ERR_PILOT_BUFSIZE_TOO_SMALL
@1033@132@501@ERR_PILOT_INVALID_INDEX
@1033@131@500@ERR_PILOT_NO_USERS
@1033@130@resStrColumnContents@nnnnnnnnnnnnnnnn;99/99/9999;55555 bytes;160x160 pixels;16-bit (65536 colors) 
@// dlgHotSyncDestination (Dialog)@ @ @
@1033@125@dlgHotSyncDestination@Choose Destination
@1033@128@dlgHotSyncDestinationPromptString@Choose Destination to Install to:
@1033@127@IDCANCEL@Cancel
@1033@126@IDOK@OK
@// dlgActiveSyncDestination (Dialog)@ @ @
@1033@120@dlgActiveSyncDestination@Choose Destination Folder
@1033@123@dlgActiveSyncDestinationPromptString@Folder Name (ie. /My Documents/PathAway):
@1033@122@IDCANCEL@Cancel
@1033@121@IDOK@OK
@// dlgSendingToDevice (Dialog)@ @ @
@1033@116@dlgSendingToDevice@Sending to Device
@1033@119@resCapProgress@
@1033@118@dlgSendingToDeviceresCapAlbumName@Sending
@1033@117@IDCANCEL@Cancel
@// dlgActiveSyncNewName (Dialog)@ @ @
@1033@112@dlgActiveSyncNewName@Name this map database
@1033@115@dlgActiveSyncNewNamePromptString@Please give this map a file name:
@1033@114@IDCANCEL@Cancel
@1033@113@IDOK@OK
@// dlgActiveSyncSuccess (Dialog)@ @ @
@1033@109@dlgActiveSyncSuccess@Map Sent
@1033@111@dlgActiveSyncSuccessMessageString@Map "^0" in now installed on your handheld device.
@1033@110@IDOK@OK
@// dlgActiveSyncReplace (Dialog)@ @ @
@1033@105@dlgActiveSyncReplace@Replace existing map?
@1033@108@dlgActiveSyncReplacePromptString@An existing map named "^0" already exists on the device. Are you sure you want to replace it?
@1033@107@IDCANCEL@Cancel
@1033@106@IDOK@Replace
@// IDD_Calibrate (Dialog)@ @ @
@1033@61@IDD_Calibrate@
@1033@104@IDCANCEL@Close
@1033@103@IDOK@Apply
@1033@102@CalPointsMarkCheckbox@Mark
@1033@101@CalPointsShowCheckbox@Show
@1033@100@CalPointsRemoveButton@Remove
@1033@99@CalPointsNextButton@Next >
@1033@98@CalPointsPrevButton@< Prev
@1033@97@IDC_STATICEditUTMZone@Zone
@1033@96@resSouthHemCheckbox@Southern Hemisphere
@1033@95@IDC_STATICPrompt@
@1033@94@IDC_STATICTTQVRequired@Touratech-QV is required to Calibrate for 3x3
@1033@93@IDC_STATICCalPointX@Map X
@1033@92@IDC_STATICCalPointY@Map Y
@1033@91@IDC_STATICScale@k_0
@1033@90@IDC_STATICCalPointGrid@Grid:
@1033@89@IDC_STATICCalPointLong@Longitude:
@1033@88@IDC_STATICCalPointLat@Latitude:
@1033@87@IDC_STATICCalPoints@Calibration Points
@1033@86@IDC_STATICBRGrid@BR Grid:
@1033@85@IDC_STATICTLGrid@TL Grid:
@1033@84@IDC_STATICBRLatitude@BR Latitude:
@1033@83@IDC_STATICTLLongitude@TL Longitude:
@1033@82@IDC_STATICTLLatitude@TL Latitude:
@1033@81@IDC_STATICy_0@y_0
@1033@80@IDC_STATICx_0@x_0
@1033@79@IDC_STATICBRLongitude@BR Longitude:
@1033@78@IDC_STATIClat_2@lat_2
@1033@77@IDC_STATIClat_1@lat_1
@1033@76@IDC_STATIClat_0@lat_0
@1033@75@IDC_STATIClon_0@lon_0
@1033@74@IDC_STATICProjParam@Projection Parameters
@1033@72@IDC_STATICProj@Projection:
@1033@71@resCoordPoints@Known Points
@1033@70@resCoordScale@Center and Scale
@1033@69@resCoordTLBR@Top-Left and Bottom-Right
@1033@68@IDC_STATICCoordType@Coordinate Type
@1033@66@IDD_CalibrateGridString@Coordinate Grid:
@1033@64@IDD_CalibrateDatumString@Map Datum:
@1033@62@IDD_CalibrateTypeString@Calibration Type:
@// dlgImport (Dialog)@ @ @
@1033@52@dlgImport@Import Map
@1033@60@resCheckboxCompressed@Compressed
@1033@58@dlgImportScaleString@Scale Factor:
@1033@56@dlgImportColorString@Color Depth: 
@1033@55@dlgImportMapNameString@Map Name:
@1033@54@IDCANCEL@Cancel
@1033@53@IDOK@OK
@// dlgAbout (Dialog)@ @ @
@1033@47@dlgAbout@About PathAway Tools - Map Manager
@1033@51@IDC_Version@v 4.00.02
@1033@50@dlgAboutCopyrightsString@Copyright (c) 2001-06 MuskokaTech\n\nJPEG Library by the Independent JPEG Group: www.ijg.org
@1033@49@dlgAboutAboutGroupString@About PathAway Tools - Map Manager 4.0
@1033@48@IDOK@OK
@// dlgHotSyncNewName (Dialog)@ @ @
@1033@43@dlgHotSyncNewName@Name this map database
@1033@46@dlgHotSyncNewNamePromptString@Please give this map a file name:
@1033@45@IDCANCEL@Cancel
@1033@44@IDOK@OK
@// dlgHotSyncReplace (Dialog)@ @ @
@1033@39@dlgHotSyncReplace@Replace existing map?
@1033@42@dlgHotSyncReplaceresCapAlbumName@An existing map named "^0" is already scheduled to be sent with HotSync. Are you sure you want to replace it?
@1033@41@IDCANCEL@Cancel
@1033@40@IDOK@Replace
@// dlgHotSyncSuccess (Dialog)@ @ @
@1033@36@dlgHotSyncSuccess@Map Sent
@1033@38@dlgHotSyncSuccessresCapAlbumName@Map "^0" will be sent to your handheld next time you HotSync.
@1033@37@IDOK@OK
@1033@31@Popup@&Help
@1033@33@resMCmdHelpAbout@&About Map Manager
@1033@32@resMCmdHelpHelp@&Help\tF1
@1033@31@Popup@&Map
@1033@1319@ID_MAP_RESAMPLEORIGINAL@Resample Original...
@1033@1318@ID_MAP_COMPRESSEDOS33@Compressed (OS 3.3+)
@1033@1312@Popup@&Change color depth
@1033@1317@resMCmdColorDepth1Bit@&1-bit (BW)
@1033@1316@resMCmdColorDepth2Bit@&2-bit (4 grays)
@1033@1315@resMCmdColorDepth4Bit@&4-bit (16 grays)
@1033@1314@resMCmdColorDepth8Bit@&8-bit (256 colors)
@1033@1313@resMCmdColorDepth16Bit@&16-bit (65536 colors)
@1033@1311@ID_MAP_CALIBRATEMAP@Map Calibration...
@1033@1310@resMCmdActionOptions@Map Details...
@1033@20@Popup@&View
@1033@1308@IDM_ZOOMFIT@Zoom to &Fit\tCtrl F
@1033@1307@IDM_ZOOM100@&Actual Size\tCtrl A
@1033@1306@IDM_ZOOMOUT@Zoom &Out\tCtrl -
@1033@1305@IDM_ZOOMIN@&Zoom In\tCtrl +
@1033@10@Popup@&File
@1033@19@resMCmdFileExit@E&xit\tAlt+F4
@1033@18@resMCmdFileExportMap@E&xport Map.Calibration...
@1033@17@resMCmdFileSendToWinMobile@Send Map to &Windows Mobile Device...
@1033@15@Popup@Send Map to PalmOS via &HotSync
@1033@16@128@No users
@1033@14@resMCmdFileSaveAs@Save PathAway  Map &As...
@1033@13@resMCmdFileSave@&Save PathAway Map\tCtrl+S
@1033@12@resMCmdFileOpen@&Open PathAway Map...\tCtrl+O
@1033@11@resMCmdFileNew@&Import New Map...\tCtrl+I