Garmin GPSmap 60 C <-> Pathaway 3

Questions and problems regarding connecting GPS Receivers.

Moderators: Scott, PathAway

guest

Garmin GPSmap 60 C <-> Pathaway 3

Postby guest » Fri May 27, 2005 3:07 pm

I use a Garmin GPSmap 60 C and I want to transfer tracks/routes/waypoints from and to this GPS receiver. The communication via NMEA protocol works fine. But with the "Garmin-Garmin" protocol I can not establish a connection between my Palm an the Garmin hand-held.
With the program GPilotS I can transfer tracks/routes/waypoints from and to the GPS. So I am pretty sure that I have no hardware problem.
Any suggestions where the problem could be?

User avatar
Scott
Site Admin
Posts: 1033
Joined: Mon Apr 18, 2005 8:49 pm
Location: Ontario, Canada
Contact:

Postby Scott » Tue May 31, 2005 7:22 pm

What PDA model are you using?

falledd
Posts: 6
Joined: Fri May 27, 2005 3:11 pm
Location: Germany

Postby falledd » Wed Jun 01, 2005 11:07 am

The topic is started by me. I was not registered at the moment of creating the topic.

I am using a PalmOne Tungsten T5 and the PW v3.01b35...

falledd
Posts: 6
Joined: Fri May 27, 2005 3:11 pm
Location: Germany

Postby falledd » Tue Oct 11, 2005 2:40 pm

Any new cognitions concerning the problem above :?:

User avatar
Scott
Site Admin
Posts: 1033
Joined: Mon Apr 18, 2005 8:49 pm
Location: Ontario, Canada
Contact:

Postby Scott » Tue Oct 11, 2005 7:02 pm

The Garmin 60C and 276C use protocols not yet implemented by PathAway. We will have support for these devices soon.

Alain B
Posts: 2
Joined: Sun May 22, 2005 7:59 am
Location: France

problem transfert wp , route, tracks with GARMIN 172C / PPC

Postby Alain B » Sat Nov 05, 2005 12:11 pm

Hello
I have the same problem with a Gamin 172C and Pathaway on PPC thoshiba e750

No possibility transfert wp, route, tracks from GPS to Pathaway on PPC

What solution ?
Thank you
Alain

User avatar
Scott
Site Admin
Posts: 1033
Joined: Mon Apr 18, 2005 8:49 pm
Location: Ontario, Canada
Contact:

Postby Scott » Mon Nov 07, 2005 2:49 am

A new build of PathAway 3 has been posted that corrects the GPSMap 276C, and 60C Upload and Download.
Palm OS build: 3.01b38
WinMobile build: 3.10.52
Simply download and install over your current version. This is a free update for version 3 owners.

Alain B
Posts: 2
Joined: Sun May 22, 2005 7:59 am
Location: France

Postby Alain B » Mon Nov 07, 2005 12:25 pm

Scott wrote:A new build of PathAway 3 has been posted that corrects the GPSMap 276C, and 60C Upload and Download.
Palm OS build: 3.01b38
WinMobile build: 3.10.52
Simply download and install over your current version. This is a free update for version 3 owners.



OK Scott
I download this new version , and I try on my GPSMap 172C,
I hope it's the same update than for 276c and 60c ???

Thank's
alain

falledd
Posts: 6
Joined: Fri May 27, 2005 3:11 pm
Location: Germany

Postby falledd » Tue Nov 29, 2005 5:36 pm

Hi,

I tried the new version (3.01b38) on my Tungsten T5 and it didn´t work.

I did a little test which may help to locat the problem: I connected the T5 via serial cable to my PC, where 'HyperTerm' was listening at the serial port. Then I tried to connect PW3 to the Garmin GPS handheld, but nothing was send out of the serial port of the T5 (ser0). I did the same test again with GPilotS there 'HyperTerm' received something...


Return to “GPS Receiver Support”

Who is online

Users browsing this forum: No registered users and 1 guest